Korenix JetI/O 6510 User Manual page 20

4. Select "Add -> New Device", the popup window "Driver Selection" will appear. (Only
appear in the first time you add new device). Click "Add" and type the driver name and
correct IP address. Click "OK" to next popup windows for Driver Selection. Use "Edit
-> Comm Setting" can modify the parameters.
Figure 4.1 "Add" the "New Device".
Figure 4.2 Installed Driver Selection Window.
Figure 4.3 "Ethernet Driver" for the devices.
5. Type the "Device Name" and select the "Device Type" in the "Device Configuration"
window.
17