Table of Contents
Advertisement
4.3
Device Finder Utility
1. Go to the "Utility -> Device Finder" folder. Click "DeviceFinder.exe" to run the program.
2. Click "Setting" of the DF Setting, you can configure the polling period time.
3. Click "Setup" of the EEPROM, you can see the info of the device. It's good to do
debugging.
4. Click "Search", Device Finder can automatically search the JetI/Os.
5. Click "IP Search" to search one specific IP address.
6. Click "Device Setup" to configure the IP address... basic network settings.
7. Click "Web Browser" to connect the web UI of the device.
8. Click "Reboot" to reboot the device.
9. Click "Upgrade" to upload the new firmware.
10. Click "Exit" to exit the program.
4.4
SNMP
Simple Network Management Protocol (SNMP) is a protocol used for exchanging
management information between network devices. SNMP is a member of the TCP/IP
protocol suite. JetI/O 6500 series support SNMP v1 and v2c.
An SNMP managed network consists of two main components: agents and a manager. An
agent is a management software module that resides in a managed switch. An agent
translates the local management information from the managed device into a SNMP
compatible format. The manager is the console through the network.
JetI/O 6500 series supports Public MIB: System. Private MIB includes channels'
information. SNMP Trap allows the JetI/O to send the active alarm to trap servers.
20
Advertisement
Table of Contents
