Table of Contents
Advertisement
Disassembly
Removing the RF Module
Figure 2 - 3
RF Module
1. Turn off the computer and pull the LCD up and forward to allow easier access to the latch " 1 ".
Removal
2. Slide the latch to unlock the module case and hold in place as you pull the case out of the bay (the left bay latch
Sequence
slides to the right).
3. Pull the RF module " 2 " case out of the bay.
a.
Slide the latch and
4. Turn the case over and remove screws " 3 " - " 5 ", then remove the case cover " 6 ".
hold in place.
5. If there is an RF module " 7 " into the case, remove screws at positions " 8 " and " 9 " and disconnect cable " 10 ".
b.
Pull the module
case out of the
bay.
c.
Remove the three
a.
screws from the
case cover.
d.
Remove the case
cover.
e.
If there is an RF
module
in
the
case remove the
screws.
f.
Remove
the
cable.
and
RF
module.
d.
2.
RF module case
7.
Optional
RF
module
• 5 screws (if mod-
ule is included)
2 - 12 Removing the RF Module
b.
1
e.
6
9
7
8
c.
2
f.
3
4
5
10
Advertisement
Table of Contents
