Intel LP300 Service Manual page 36

4. Remove screws " 1 "-" 10 " ( Figure 2 - 5 ) from the rear of the LCD back cover " 11 " ( Figure 2 - 5 ).
5. Carefully ease the LCD back cover up from the main unit and disconnect the fan cable (see Fan Cable note below)
from the mainboard at point " 12 " ( Figure 2 - 5 ).
6. Disconnect the audio cable " 13 " ( Figure 2 - 5 ) from the inside of the case.
13
Later models will not include the fan cable, and therefore this step may be ignored.
2
1
11
10
9
8
Fan Cable
3
4
12
5
6
7
Removing the System Memory 2 - 15
Disassembly
Figure 2 - 5
Memory Removal
Sequence
(Cont..)
a. Remove the
screws from the
LCD back cover.
Ease up the back
cover and
disconnect the fan
and audio cables,
then lift the back
cover away
b. Remove the
screws from the
back of the LCD
shielding plate.
c. Slide the shielding
plate forward and
lift away from the
main assembly.
d. The memory
socket will now be
visible.
11. LCD back cover
• 10 Screws