Disassembly Steps - Intel LP300 Service Manual

Disassembly

Disassembly Steps

The following lists the disassembly steps, and on which page to find the related information. PLEASE PERFORM THE
DISASSEMBLY STEPS IN THE ORDER INDICATED.
Memory Module
Warning
There must be a mem-
ory module present in
both DIMM sockets to
make sure the compu-
ter will boot up. The
memory modules must
be the same size and
specification. The op-
tions are listed in the
table below.
2 - 4 Disassembly Steps
To remove the hard disk drive assembly:
1.Remove the hard disk drive assembly
To remove the CD device(s):
1.Remove the CD Device
To remove the RF module:
1.Remove the RF module
To remove the system memory:
1.Remove the LCD hinge cover
2.Remove the IDE shielding plate
3.Remove the LCD back cover
4.Remove the LCD shielding plate
5.Remove the system memory
To remove the CPU:
1.1.Remove the LCD hinge cover
2.Remove the IDE shielding plate
3.Remove the LCD back cover
4.Remove the LCD shielding plate
5.Remove the CPU
page 2 - 10
page 2 - 11
page 2 - 12
page 2 - 14
page 2 - 14
page 2 - 15
page 2 - 16
page 2 - 16
page 2 - 14
page 2 - 14
page 2 - 15
page 2 - 16
page 2 - 17