Chapter 4 Operation And Display - Fuling Inverter DZB200 Series User Manual

DZB Series
Chapter 4 Digital Keypad Operation
4.1
Description of the Digital Keypad
● D igital Keypad Par ts and Functions
This digital keypad module includes two parts: display panel and a keypad. The display pane l
allow s the user to program the AC drive, a s well as view the different operating parameters. The
keypad is the user interface to the AC motor drive. Refer to the following figure for a description
of the different parts.
RUN STOP JOG
Function indi cator
FWD
REV
Forward / Reverse key
JOG
Jog key
RUN
Run key
Fig. 4-1 Operation Panel Schematic Diagram
Key
Program / Reset
PRGM
RESET
First-stage menu entry or exit.
Function / Data
Displays information on the AC drive status such as the reference frequency,output
FUNC
frequency, or output current in the normal mode. While the drive is in the Program Mode,
DATA
press this key once to display the current parameters.
After changing the parameters, press this key again to store the new parameters.
Forward / Reverse
Used to toggle between forward and reverse operation.
FWD
R EV
Pressing this key will cause the motor to ramp down to 0 Hz and then ramp up to the preset
speed in the opposite direction.
JOG/
JOG
Used to start the AC drive, then run at the jog frequency.
When modify parameter, can select modified bit of the parameter.
- 17-

Chapter 4 Operation and Display

FWD REV
Digital display
Up and down keys
▲
PRGM
RESET
Program key
▲ FUNC
DATA
Function / Data key
STOP
Stop / Reset key
Description
DZB Series
Run
Used to start the AC drive operation.
RUN
This key has no effect when the drive is set to terminal run.
Stop
STOP Used to s top the AC drive operation.
If the AC drive has stopped due to a fault, press this button to reset the drive.
Up / Down
Press the "Up" or "Down" button to change parameter settings.
These keys may also be used to scroll through different operating values or parameters.
Explanation of Screen Display
1. Explanation of Displayed Mes sages on Running status r
Displayed
Displayed Message
Symbol
Sett ing frequency
Running frequency
Output current
Output voltage
Running speed
Output power
Output torque
DC bus voltage
PID setpoint
PID feedback
Input terminal status
Output terminal status
VI value
CI value
Current segment of
multi-speed control
- 18-
Chapter 4 Operatio n and Display
( efer to F3.05):
Operation
" "
Press key
FUNC QUICK
DATA JOG
" "
Press key
FUNC QUICK
DATA JOG
" "
Press key
FUNC QUICK
DATA JOG
" "
Press key
QUICK FUNC
DATA JOG
" "
Press key
QUICK FUNC
DATA
JOG
" "
Press key
FUNC QUICK
DATA JOG
" "
Press key
FUNC QUICK
DATA
JOG
" "
Press key
FUNC QUICK
DATA
JOG
" "
Press key
FUNC QUICK
DATA
JOG
" "
Press key
QUICK FUNC
DATA
JOG
" "
Press key
QUICK FUNC
DATA
JOG
" "
Press key
FUNC QUICK
DATA JOG
" "
Press key
QUICK FUNC
DATA JOG
" "
Press key
QUICK FUNC
DATA JOG
" "
Press key
QUICK FUNC
DATA JOG
www.yusto.ru
info@yusto.ru