ASC symbol remains off; if
4
ASC self-diagnosis is not
completed, ASC symbol contin-
62
ues to flash.
ASC function is activated.
As an alternative to pressing
the ASC button, the ignition
can also be switched off and
then on again.
If the ASC warning light
lights up after switching
z
the ignition off and on and then
continued driving over 5 mph
(10 km/h), an ASC error has
occurred.
Seat height
Adjusting seat height
Removing driver's seat (
Turn driver's seat over.
Insert seat rods 1 and 2 into
the mounts 3.
69)
If both seat rods are not
in the same position, the
driver's seat can come loose
from the locking device and wig-
gle.
Always insert both seat rods in
the same position.
Insert seat rods in position 4.
High seat position.
Insert seat rods in position 5.
Low seat position.
Installing driver's seat (
Windshield
Adjusting windshield
Loosen clamping screws 1 on
left and right.
70)