BMW R 1200 GS Rider's Manual page 125

Place intake snorkel 2 against
air filter housing.
Slide retaining brackets 1 into
holder until they audibly click
into place.
Make sure that the throttle
valve cable is seated in the
guide 4 of the intake manifold
and the throttle valve is resting
against the stop.
Insert tank cover 6.
Install mounting screws 5.
Press front of side panel 4 into
bracket.
Close quick-release fasten-
ers 2.
Orient quick-release fastener 3
horizontally and press into side
panel 4.
The quick-release fastener
clicks audibly into place.
8
123
z