Installing Driver's Seat - BMW R 1200 GS Rider's Manual

4
70
Turn key 1 in seat lock coun-
terclockwise while pressing
down on rear region of driver's
z
seat 3.
Lift rear of driver's seat and
remove.

Installing driver's seat

Install driver's seat 1 into front
locking device.
Lay driver's seat loosely on
motorcycle.
If too much pressure is ap-
plied in the forward direc-
tion, there is a danger that the
motorcycle will be pushed off its
stand.
Make sure that the motorcycle is
steady on its stand.
Press driver's seat lightly for-
ward in rear area and then firm-
ly downward.
Driver's seat audibly engages.
Installing the passenger's seat
( 70)
Installing the passenger's
seat
Installing driver's seat (
Insert passenger seat 2 into
rear locking device.
If too much pressure is ap-
plied in the forward direc-
tion, there is a danger that the
motorcycle will be pushed off its
stand.
70)