BMW R 1200 GS Rider's Manual page 121

Remove screws 1.
Pull lamp housing 2 toward
rear from retaining brackets.
Press bulb 3 into its socket
and turn it counterclockwise to
remove.
Replace defective bulb.
Bulb of tail/brake light
P21/5W / 12 V / 5 W / 21 W
Press bulb 3 into the fitting
and install turning clockwise.
The bulb cannot only be
inserted in the socket in
one direction.
Insert lamp housing 2 into re-
taining brackets.
Install screws 1.
Replacing front and rear
turn indicator bulbs
If it is not standing firmly,
the motorcycle could topple
in the course of the operations
described below.
Make sure that the motorcycle is
steady on its stand.
Make sure ground is level and
firm and park motorcycle.
8
119
z