Automatic Stability Control Asc Oe - BMW R 1200 GS Rider's Manual

4
60
Hold down ABS button 1.
ABS warning light begins to
light up.
z
Release ABS button within five
seconds.
ABS warning light contin-
ues to light up.
ABS function is switched off.
Behavior with ABS
deactivated
With the ABS function switched
off, first only the control on the
front wheel is deactivated. If the
motorcycle is then only braked
with the handbrake lever, ABS
regulation continues to be active
for the rear wheel also braked via
the integral function. The ABS
regulation for the rear wheel is
not switched off until the foot-
brake lever is actuated.
Switching on ABS
function
Hold down ABS button 1.
ABS warning light goes
out; if self-diagnosis has
not been completed, it begins to
flash.
Release ABS button within five
seconds.
ABS warning light remains
off or continues to flash.
ABS function is switched on.
As an alternative to pressing
the ABS button, the ignition
can also be switched off and
then on again.
If the ABS light continues
to light up after switching
the ignition off and then on again,
an ABS fault has occurred.
Automatic Stability
OE
Control ASC
Operation
The ASC button switches into
the offroad mode ( 88) and
switches the ASC off or on.
If no ASC symbol is shown, the
ASC is active.