Seat Height; Windshield - BMW R 1200 GS Rider's Manual

The ASC symbol is no
longer displayed; if ASC
self-diagnosis is not completed,
ASC symbol flashes.
Release button 1 within two
seconds.
The ASC symbol is still not
displayed or continues to
flash.
ASC function is activated.
As an alternative, the ignition
can also be switched off and
then on again.
If the ASC warning light
lights up after switching the
ignition off and on and then con-
tinued driving over 3 mph (5 km/
h), an ASC error has occurred.

Seat height

Adjusting seat height
Removing driver's seat (
Turn driver's seat over.
Remove seat rods 1 and 2
from holders 3.
If both seat rods are not
71).
in the same position, the
driver's seat can come loose
from the locking device and wig-
gle.
Always insert both seat rods in
the same position.
Mount seat rods in desired po-
sition again.
Position 4: high seat position
Position 5: low seat position
Installing driver's seat (

Windshield

Adjusting windshield
Loosen clamping screws 1 on
left and right.
4
61
71).
z