Activating ASC function
4
62
Press and hold button 1 until
z
ASC warning light changes its
display behavior.
ASC warning lamp goes
out; if self-diagnosis has
not been completed, it begins to
flash.
Release button 1 within two
seconds.
ASC warning light remains
off or continues to flash.
ASC function is activated.
As an alternative, the ignition
can also be switched off and
then on again.
If the ASC warning light
lights up after switching the
ignition off and on and then con-
tinued driving over 3 mph (5 km/
h), an ASC error has occurred.
Seat height
Adjusting seat height
Removing driver's seat (
Remove seat bearing rod 1
and remount at desired height.
Installing driver's seat (
Windshield
Adjusting windshield
Switch on ignition.
72).
Press button 1 at top to raise
windshield.
Press button 1 at bottom to
lower windshield.
Cruise control
with cruise-control system
73).
OE