Seat Height - BMW R 1200 GS Adventure Manual

When the ASC symbol goes
out or starts to flash, release
the ASC button within three
seconds.
ASC symbol does not
show; if self-diagnosis has
not completed the ASC symbol
continues to flash.
The ASC function is activated.
Instead of pressing the ASC
button, you have the option of
switching the ignition off and
then on again.
An ASC fault has occurred
if the ASC warning light
shows when the motorcycle ac-
celerates to a speed in excess
of 10 km/h after the ignition was
switched off and then on again.

Seat height

Adjusting seat height
Remove the front seat (
Turn the front seat upside
down.
Introduce seat rods 1 and 2
into holders 3.
68)
The front seat can work
loose and wobble if the two
seat rods are not in the same
position.
Always be sure to install both
seat rods in the same position.
Introduce the seat rods in posi-
tion 4.
Seat set to high position.
Introduce the seat rods in posi-
tion 5.
Seat set to low position.
Install the front seat (
4
59
z
68)