Automatic Stability Control Asc Oe - BMW R 1200 GS Adventure Manual

Response with ABS
deactivated
If you deactivate the ABS, the
function is initially disabled for
the front wheel only. If you sub-
sequently apply the brakes by
pulling only the handbrake lever,
the Integral function ensures that
the rear wheel is also braked and
ABS control remains active for
the rear wheel. ABS control for
the rear wheel is not deactivated
until you depress the footbrake
lever.
Activating ABS function
Press and hold down ABS but-
ton 1.
ABS warning light goes out;
if self-diagnosis has not
completed it starts flashing.
Release the ABS button within
five seconds.
The ABS warning light re-
mains off or continues to
flash.
The ABS function is activated.
Instead of pressing the ABS
button, you have the option of
switching the ignition off and
then on again.
If you switch the ignition off
then on again and the ABS
light comes back on, there is a
fault in the ABS.
Automatic Stability
OE
Control ASC
Operation
The ASC pushbutton enables
you to switch to off-road mode
( 87) and to deactivate or re-
activate ASC.
ASC is active when the ASC
symbol does not show.
This symbol appears on the
display to indicate that ASC
is active in off-road mode.
This symbol appears on the
display to indicate that ASC
has been deactivated.
4
57
z