Automatic Stability Control; Asc Oe; Automatic Stability Control Asc Oe - BMW R 1200 GS Adventure Rider's Manual

ABS warning light lights
4
up; if self-diagnosis
is not completed, the ABS
50
warning light changes from
flashing to being continuously
lit.
Release ABS button with-
in five seconds after ABS
warning light lights up.
ABS function is switched
off.
ABS warning light con-
z
tinues to light up.
Behavior with ABS
deactivated
With the ABS function deac-
tivated, first only the control
on the front wheel is switched
off. If the motorcycle is on-
ly braked with the handbrake
lever, ABS regulation contin-
ues to be active for the rear
wheel also braked via the in-
tegral function. The ABS reg-
ulation for the rear wheel is
not switched off until the foot-
brake lever is actuated.
Switching on ABS
function
Hold down ABS button 1.
ABS warning light goes
out; if self-diagnosis
is not completed, the ABS
warning light changes from
being continuously lit to
flashing.
Release ABS button with-
in five seconds after ABS
warning light goes out.
ABS warning light remains
off.
If ABS self-diagnosis is not
completed, ABS warning
light continues to flash.
ABS function is switched
on.
As an alternative to pressing
the ABS button, the igni-
tion can also be switched
off and then on again.
If the ABS light con-
tinues to light up after
switching the ignition off and
then on again, an ABS fault
has occurred.
Automatic Stability
OE
Control ASC
Operating the ASC
The ASC button switches into
the offroad mode (
deactivates or activates the
ASC.
84) and