Tools And Materials Required; Assembly Safety - Leisure Time 5007 User Manual

SAFETY AND ASSEMBLY INFORMATION

Tools and Materials Required:

Claw Type Hammer
Framing Square or Level
Box Wrench or Sockets (9/16" & ½")
Electric Drill or Cordless
Drill Bits: 3/16", 3/8" 5/16" & 7/16"(High Speed)

Assembly Safety:

• Keep the work area clean and clear of obstructions.
• Children should stay out of the work area until the safe play area is cleared of obstacles, the gym set has been completely
assembled, all hardware has been tightened and checked and all tools have been picked up.
• Keep children off the gym set until it has been completely assembled.
• Some parts of the assembly process may require help from another competent adult.
• Do not stand on the platform until the gym set has been completely assembled. Use a step ladder if you can not reach high
enough.
• Follow the manufacturers' safety recommendations for the tools and equipment you use.
• Avoid assembling your gym set in poor weather conditions.
YOUR PLAYGROUND, INC READY-TO-ASSEMBLE PLAYSET IS STAINED AT
OUR FACTORY. STAINING IS NOT NEEDED AT THE TIME OF INITIAL ASSEMBLY.
THE WOODEN PARTS FOR YOUR PLAYSET ARE MADE FROM
CYPRESS AND OTHER UNTREATED NATURALLY DECAY RESISTANT LUMBER,
Next Generation 5007 061206
HAVING THE PROPER TOOLS ON HAND WILL EASE AND
REDUCE THE ASSEMBLY TIME OF YOUR NEW PLAYSET.
WITH THE FOLLOWING, POSSIBLE EXCEPTIONS:
POLYETHYLENE ENCASED POSTS:
Some lumber inside the polyethylene encased posts MAYBE
subject to the following treatment
Supplier:
Preservative:
Retention level:
Wood species:
Page 3 - SAFETY & ASSEMBLY INFO
10 ft. Tape Measure
10 ft. Step Ladder
Screwdriver (Medium Phillips)
Beeswax or Soap
(Used to lubricate screw threads)
Pacific Wood Preserving
22125 Rock Creek Rd.
Sheridan, OR 97378
Pacbor Treated (Disodium
Octaborate Tetrahydrate)
.118 pcf
Pine, White Fir, Hem Fir,
and/or Doug Fir
© Copyright Playground Inc