Leisure Time 5007 User Manual page 27

L2 Club House Wall Board * 4 Holes * 1 Req
11/16 x 4-1/2 x 29 [ 1.74 x 11.43 x 73.66 ]
M10 Club House Wall Board * 4 Holes * 6 Req
11/16 x 3-3/8 x 16 [ 1.74 x 8.57 x 40.64 ]
G4
C2
M6
M8
Next Generation 5007 061206
M6 Club House Wall Board * 4 Holes * 28 Req
11/16 x 3-3/8 x 29 [ 1.74 x 8.57 x 73.66 ]
M7 Window Trim * 4 Holes * 1 Req
11/16 x 3-3/8 x 28-3/4 [ 1.74 x 8.57 x 73.03 ]
L2
M6
M5
H6
G2
G8
M10
M10
N3
M8
G2
M12
M12
M7
G8 M10
M10
N3
M8
STEP 36
On left side of Tower, between C2 Posts,
attach ten M6 Wall Boards and one L2
Wall Board. L2 will be in center with five
M6s on each side. Space evenly apart
and fasten with 1-1/2" Wood Screws at
Top Rail and 1-1/4" Wood Screws at
C2
Bottom Rail.
STEP 37
Attach six M10 Wall Boards and one N3
Wall Board to back left corner of
C2
clubhouse. Starting at C2 Posts, place
three M10s; then place the one N3; and
then place the last three M10s. Space
evenly and fasten to Bottom Rail using
1-1/4" Wood Screws.
STEP 38
Attach M12 Window Trim to C2 Post pushed tight
against G2 Sculptured Rail and flush with outside
of Post using 1-1/2" Wood Screws. Then attach
M7 Window Trim flush with outside edge of both
M12 and C2 post. Fasten to C2 with 1-1/2" Wood
Screws. Now attach M12 Window Trim butting
ends tight at Top of G2 and flush with end of M7
C2
Window Trim and fasten with 1-1/2" Wood
Screws; finish by fastening top of Wall Boards N3
and M10s to M7, using 1/1/4" Wood Screws.
Page 26
N3 Club House Wall Board * 2 Holes * 1 Req
11/16 x 2-1/2 x 16 [ 1.74 x 6.35 x 40.64 ]
M12 Window Trim * 2 Holes * 2 Req
11/16 x 3-3/8 x 6-3/4 [ 1.74 x 8.57 x 17.15 ]
#8 X 1-1/4
#8 X 1-1/2 "
WOOD
WOOD
SCREW
SCREW
© Copyright Playground Inc
"