Leisure Time 5007 User Manual page 31

M9 Wall Board * 4 Holes * 23 Req
11/16 x 3-3/8 x 23 [ 1.74 x 8.57 x 58.42 ]
M11 Entry Ladder Support * 4 Holes * 1 Req
11/16 x 3-3/8 x 16 [ 1.74 x 8.57 x 40.64 ]
C2
E1
Next Generation 5007 061206
15 1/4" METAL DOWELS
Y28
M9
M9
M9
E1
4 REQUIRED
M1
M9
M9 M9
M9
M1
G1
M11
16"
Page 30
E1 Entry Ladder Rail * 4 Holes * 1 Set Left & Right Req
1-3/8 x 3-3/8 x 52 [ 3.49 x 8.57 x 132.08 ]
C1
STEP 46
Attach eight M9 Wall
Boards to the inside of
M1s spacing
approximately 2-3/4"
M9
apart, again using 1 1/4"
Wood Screws.
Step 47
Placing Entry Ladder Rail E1, either
left or right, flat on ground, drive 15-
1/4" Metal Dowels, using Pounding
Block, into Rail. Then place opposite
Ladder Rail, lining up Dowels, using
Pounding Block, drive together so that
Entry Ladder Rails are 16" apart
outside to outside. Then attach M11
Entry Ladder Back to inside of Ladder
Rails measuring up from bottom 1/8"
and fastening with 2" Wood Screws.
#8 X 1-1/4 "
WOOD
#8 X 2 "
SCREW
WOOD
SCREW
© Copyright Playground Inc