Connecting The Ac Power Cord - Eiki EIP-UHS100 Owner's Manual

Connecting the AC Power Cord

This projector uses nominal input voltages of 100-240 VAC. It is designed to work with
single-phase power systems having a grounded neutral conductor.
To reduce the risk of electrical shock, do not plug into any other type of power system. If
you are not sure of the type of power being supplied, consult your authorized dealer or
service center. Connect the projector with all peripheral equipment before turning on the
projector.
Note
Unplug the AC power cord or turn off the MAIN ON/OFF Switch when the projector is not in use. When the
projector is in stand-by mode, it consumes a little electric power.
28