Remote Control - Eiki EIP-UHS100 Owner's Manual

Remote Control

2
1
3
4
8
11
10
13
14
16
19
21
22
1 ON
Turn the projector on.
2. OFF
Turn the projector off.
3. FOCUS
Focuses the projected images.
5
4. ZOOM
Zoom in/out the projected image.
6
5. TEST PATTERN
Display test pattern.
6. LENS SHIFT
Shift the lens, up/down or left/right.
7
7. ENTER
Confirm the change. Open ZOOM/FOCUS OSD.
9
Press again to open LENS SHIFT.
8. MENU
12
Open and close the OSD menu.
15
9. EXIT
Close the OSD menu.
18
10. INPUT
Select a input source.
20
11. PICTURE
Starts the PICTURE function.
23
12. NETWORK
Enter the Network (LAN) menu.
13. AUTO SYNC
Automatically adjust the computer image to its
optimum setting.
14. ASPECT
Select the aspect ratio settings.
15. PIP
Display the picture-in-picture screen.
16. OVERSCAN
Select an overscan mode.
17. FREEZE
Freeze/unfreezes the on-screen picture.
18. LAMP MODE
Select a higher or lower brightness setting.
19. INFO.
Display projector information.
20. LIGHT
Turn on the remote control backlight.
21. CLEAR
Not available
22. SHUTTER
Open/close the shutter.
23. ID SET
Not available
16