Osd Introduction - Picture - Eiki EIP-UHS100 Owner's Manual

OSD Introduction – PICTURE
Picture Mode
Use ◄ or ►to select the High Bright, Presentation and Video mode.
Contrast
Use ◄ or ► to adjust the contrast of the projected image.
Note:
Brightness and Contrast controls are interactive. The screen change to one may require a subtle change to
the other in order to achieve the optimum setting
Brightness
Use ◄ or ►to adjust the level of black in the image to increase or decrease image
brightness.
Adaptive Contrast
Use ◄ or ►to adjust the light and dark aspects of the contrast curve.
Gamma
Use ◄ or ► to selerct Video, Film or Graphics.
Color
Use ◄ or ► to adjust the color temperature of the projected image.
This refers to the control of color imbalance in the darker areas of the projected image. It is
recommended that you use an external test image with many areas of dark and gray colors
(i.e. an image of 30IRE-window). If you notice minimal amount of red, green or blue in the
gray areas, adjust the offset of the corresponding color accordingly. This function will shift
the entire color spectrum for the whole image and change its brightness.
40