Lens Replacement; To Replace The Projector Lens - Eiki EIP-UHS100 Owner's Manual

Lens replacement

To replace the projector Lens

1. Press and hold the lens lock button. Support the lens and turn counterclockwise to
loosen the lens. Pull the lens backward and slide the lens out of the lens holder.
2. Insert the lens and ensure the lens touches the lens holder. Align the "
the lens label with the " " symbol on the top of the body (align to the center of the lens
hole).
Align
symbol
3. Make sure the lens is pushed into the holder and turn it clockwise to the "Lock" position.
When turning the lens, the "Click" sounds once to indicate that the lens is completely
fixed.
4. Check if the lens is really secured by trying to pull the lens out of the lens holder.
Note:
When removing the lens, make sure you press and hold the release button to loosen and unlock the lens
The projector supports the lens memory function. Perform the Center Lens function every time to calibrate
the projection lens after you installed the lens.
20
" symbol on