Fixed Width Mode - Konica Minolta bizhub 200 Service Manual

5. Selecting Print Paper
5.3.3

Fixed width mode

• This mode selects print paper whose width is the same as a received document.
Example: Metric area
Available sizes of print paper: A4 Lengthwise and A3 Lengthwise
Size of received document
Printing mode
• In this case, the system will use the B4 paper with reduction. If the B4 paper has run out,
the printing job will be halted and wait for new paper.
Example: Inch area
Available sizes of print paper: 11 x 17 Lengthwise
Size of received document
Printing mode
• In this case, the system will not print. If the Letter L paper is run out, the printing job will
be halted and wait for new paper.
• The standard and the preference modes have 4 different submodes. Each of them has
priorities for selection. (Users can select only submode1.)
Selecting a print paper whose width is the same as a received document without
Submode 1
reduction.
Selecting a print paper whose width is the same as a received document with mini-
Submode 2
mum margins (minimum nonprinting area).
Selecting a print paper to print out without reduction.
Submode 3
(The width will not be considered.)
Selecting a print paper with minimum nonprinting area.
Submode 4
(The width will not be considered.)
Example Metric area
Size of received
document
28
B4 Lengthwise
Automatic reduction (Upper reduction limit of 65 %)
Letter Lengthwise
Automatic reduction (Upper reduction limit of 60 %)
Print paper sizes
Standard
Width
preference
Width
determination
Theory of Operation Ver. 1.0 Aug. 2005
with reduction at
lengthwith
A4
on memory
B4
4551T2E523AA