Paper Size Detection - Konica Minolta bizhub 200 Service Manual

Theory of Operation Ver. 2.5 Jul. 2006
16.3.6

Paper size detection

• When the Trailing Edge Stop of the drawer is moved, the circular plate located on the bot-
tom of the drawer turns, allowing the four switches to detect the paper length.
• Moving the Edge Guide activates or deactivates the two CD Paper Size Sensors through
the cutout in the lever.
• The combination of the four FD Paper Size Detecting Switches that are either actuated or
deactuated and two CD Paper Size Sensors that are either activated or deactivated
determines the size of the paper loaded in the drawer.
Length Detection
FD Paper Size Board1/2 (PWB-I1/PWB-I2)
Width Detection
Paper Lift Motor (M7/M8)
CD Paper Size Sensor1
(PC11/PC17)
FD Paper Size Detection Switch
Tray Set Sensor (PC7/PC13)
CD Paper Size Sensor2
(PC10/PC16)
16. Paper feed section
Circular Plate
4040T2C538AA
53