Suzuki RM250 Owner's Service Manual page 218

" mark B on the handlebar holder forward.
• Set the "
• Align the paint mark C on the handlebars with the matching
surface of the handlebar holder.
• Tighten the handlebar holder bolts to the specified torque.
 Handlebar holder bolt: 25 N·m (2.5 kgf-m, 18.0 lb-ft)
NOTE:
When tightening the handlebar holder bolts, first tighten the bolts
1 then bolts 2.
• Rout the cables and hose correctly. (18-13, -14, -17)
• Apply grease to the throttle cable.
 99000-25010: SUZUKI SUPER GREASE "A"
• Install the throttle grip so the "
hole throttle cable end hooked.
• Align the throttle holder mating surface with the paint mark D
on the handlebars.
FWD
(or equivalent grease)
" mark on it aligns with the
FRONT FORK AND STEERING 16-19
Clearance
Throttle holder
Throttle spool
Throttle grip