2-10 PERIODIC MAINTENANCE
TRANSMISSION OIL CHANGE
• Warm up the engine.
• Place the motorcycle on the level ground and hold the motor-
cycle vertically.
• Remove filler cap and drain plug 1. Drain oil thoroughly.
• Tighten the drain plug firmly.
Oil drain plug: 21 N·m (2.1 kgf-m, 15.0 lb-ft)
• Pour specified amount of oil.
Oil change......... 750 ml (0.8/0.7 US/Imp qt)
Overhaul............ 850 ml (0.9/0.7 US/Imp qt)
• Tighten the filler cap.
• Run the engine for a few minutes and stop it. Wait for 5 min-
utes.
• Inspect the oil level. (2-9)
Need help?
Do you have a question about the RM250 and is the answer not in the manual?