Inspection - Suzuki RM250 Owner's Service Manual

12-6 COOLING SYSTEM

INSPECTION

IMPELLER AND GEAR SHAFT
• Inspect the impeller and gear shaft for damage.
WATER PUMP BEARING
Inspect the inner race play of the water pump bearing while it is
in the water pump housing. Rotate the inner race by finger to
inspect for abnormal noise and smooth rotation. If abnormal
noise occurs or if rough movement is noted, replace the water
pump bearing with a new one.
• Remove the water pump bearing with the special tool.
 09921-20240: Bearing remover set
Replace the removed bearing with a new one.
OIL SEAL
Visually inspect the oil seal for damage. If any damages are
found, replace the oil seal with a new one.
• Remove the oil seal with the suitable size socket wrench.
Replace the removed oil seal with a new one.
CAUTION
CAUTION
Play
Play