Ignition Coil - Suzuki RM250 Owner's Service Manual

13-8 ELECTRICAL SYSTEM
• Connect the multi-circuit tester with the peak volt adaptor
between Black/White lead wire and White/Blue lead wire.
• Measure the highest peak voltage by depressing the kick
starter lever several times forcefully.
Black/White – White/Blue
NOTE:
Be sure to connect the Red probe to the Black/White lead wire
and the Black probe to the White/Blue lead wire.

IGNITION COIL

• Remove the seat and fuel tank. (5-4)
• Remove the ignition coil 1.
Measure the ignition coil electrical resistance.
White/Blue –
Primary
Black/White
Plug cap –
Secondary
White/Blue
 09900-25008: Multi-circuit tester
 Tester knob indication: Resistance (Ω)
200 V and more
Approx. 0.17 – 0.70 Ω
Approx. 13 – 20 kΩ
W/Bl B/W