V100 Primary Functions; Upper Screen Modes; Speed,Trip Distance, Ride Time,Total Time - Vetta V100 User Manual

V100 PRIMARY FUNCTIONS

UPPER SCREEN MODES

SPD displays the current Speed and is updated
continuously. DST displays current Trip Distance.
Automatically resets after the maximum trip
distance (999.9) is achieved. Trip Distance is
displayed in the SPD/DST screen mode and
starts automatically when the wheel rotates and
TT timer is active. Reset DST to zero by
pressing Button #3 for 2 seconds with the
timers turned off in any screen mode except
STP/IDS.
Ride Time and Total Time are shown
simul-taneously. Ride Time (RT) measures actual
riding time and starts automatically when the
timers are set to "0:00:00" and the wheel rotates.
If not, TT timer must be active for RT timer to
operate. Total Time (TT) shows the total elapsed
trip time from start to finish. Like RT, TT starts
automatically when the wheel rotates ONLY
when the timers are set to "0:00:00", or it can be
started manually by pressing Button #3 in the
RT/TT screen mode ONLY. TT can only be
stopped manually by momentarily pressing
Button #3 in RT/TT screen mode at the end of a
ride. To reset both RT and TT to zero, turn timers
off and press Button #3 for at least 2 seconds.
SPEED
TRIP DISTANCE
RIDE TIME
TOTAL TIME
SPD
DST
RT
TT