Installation Wired Model Installation; Speed Sensor & Magnet - Vetta V100 User Manual

Note: System Check is activated in two ways: 1) By pressing
Button #3 any time during NOM Setup and 2) Automatically at the
end of either Initial or NOM Setup. To exit NOM System Check
manually and enter Normal Operating Mode, press Button #3 to
return to the SPD/DST primary screen mode.
INSTALLATION
WIRED MODEL INSTALLATION
SPEED SENSOR & MAGNET
NOTE: Wired cadence is optional. Please refer to WIRED
SPEED AND CADENCE/WL2X DOUBLE WIRELESS SPEED AND
Use the zip-tie supplied to hold loosely the wired speed
Step 1:
sensor and mounting pad to the inside of either fork leg.
We recommend mounting it as high up on the fork leg
as possible to protect it from being hit by rocks,
branches or other objects while riding. (Fig. 1)
Tighten the spoke magnet to any spoke on the "sensor
Step 2:
side" of the front wheel so that it passes over the