Average Speed Maximum Speed; Speed* Cadence - Vetta V100 User Manual

Note: Whenever TT is activated, the stopwatch icon appears;
otherwise, it does not display.
CAUTION : If RT and T T timers are not 0:00:00 and you have
stopped them manually, then they MUST be restarted
manually by pressing Button #3 in RT/TT mode. If not, the
computer will not record speed or other ride data.
RIDING TIP: If the bike is in motion and Button #3 is held down
in the RT/TT screen mode with the timers deactivated, the ride
timers reset to 0:00:00. When Button #3 is released, both RT and TT
will start with the next wheel input. This is a good way to begin
timing a race or training ride with a rolling start.
AVERAGE SPEED
MAXIMUM SPEED
Average and Maximum Speed readings are
displayed simultaneously in the AVG/MAX
screen mode. Average Speed is updated every
0.1 miles or Km traveled. Reset both to zero by
pressing Button #3 for 2 seconds with timers
turned off in any screen mode except
STP/IDS.
SPEED*
CADENCE*
When installed, the Cadence kit Measures and
displays pedal Cadence in Revolutions Per
Minute (RPM). The SPD/CAD screen function
letters appear ONLY when the Cadence
hardware is installed and a Cadence signal
received by the head unit. After a current ride
data reset, the function letters will go away but
will come back with next Cadence input. Note:
RT and TT timers MUST be activated in order
for Speed and Cadence to function. *(Optional)
AVG
MAX
SPD
CAD