Express Timer Programming - JVC HM-HDS1EU Instructions Manual

44
EN
Express Timer
Programming
You can programme this recorder to timer-record as many as 16
programmes.
If you do not know the S
HOW
you wish to record, use the following procedure to set your
recorder to timer-record the programme.
Before performing Express Timer Programming:
Make sure that the recorder's built-in clock is set properly.
Turn on the TV and select the AV mode.
V number for the programme
IEW
TIMER RECORDING (cont.)
A
Turn on the recorder.
Press .
1
B
Select the deck.
Press HDD or S-VHS.
For the VHS deck:
Insert a cassette with the record safety tab intact.
C
Access the programme screen.
Press PROG.
When "PROGRAMME FULL
DELETE UNWANTED TIMER
PROGRAMME" appears on
the TV screen, you need to
cancel some of the reserved
programmes. ( pg. 46)
D
Enter the programme start time.
Press START+/– to enter the time you want recording to
start.
Press and hold START+/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
E
Enter the programme stop time.
Press STOP+/– to enter the time you want recording to
stop.
Press and hold STOP+/– to move in 30-minute increments, or
press and release repeatedly to move 1 minute at a time.
F
Enter the programme date.
Press DATE+/–.
The current date appears on the TV screen. The date you enter
appears in its place.
G
Enter the channel position.
Press PR+/–.
H
Set the tape speed.
Press MODE ( ).
p
For the VHS deck:
It is not possible to select EP mode if "COLOUR SYSTEM" is
(
set to "MESECAM". pg. 76
PROGRAMME
RECORD TO REC MODE WEEKLY/DAILY VPS/PDC
HDD SEP ON
TV PROG
START STOP DATE
– – : – – – – : – – – –/– –/– – – – – – –
CONFIRM CANCEL CATEGORY UNDECIDED
CHANGE SETTINGS BY REMOTE
+ + + +
PROG.
THEN CONFIRM
– – – –
START STOP DATE PR EXIT
)