JVC HM-HDS1EU Instructions Manual page 91

RECORDING
SYMPTOM
1. Recording cannot be started.
2. TV broadcasts cannot be
recorded.
3. Tape-to-tape editing is not
possible.
4. Camcorder recording is not
possible.
POSSIBLE CAUSE
There is no cassette loaded, or the
cassette loaded has had its record
safety tab removed.
"L-1", "L-2", "F-1", "DUB" or
"SAT" has been selected as the
input mode.
The source (another video recorder,
camcorder) has not been properly
connected.
All necessary power switches have
not been turned on.
The input mode is not correct.
The camcorder has not been
properly connected.
The input mode is not correct.
CORRECTIVE ACTION
Insert a cassette, or using adhesive
tape, cover the hole where the tab
was removed.
Set to the desired channel.
Confirm that the source is properly
connected.
Confirm that all units' power switches
are turned on.
Set the input mode to "L-1", "L-2" or
"F-1".
Confirm that the camcorder is properly
connected.
Set the input mode to "L-1", "L-2" or
"F-1".
91
EN