JVC HM-HDS1EU Instructions Manual page 71

Perfect Connections
This is an example of recommended connection if your
TV has two 21-pin AV input (SCART) connectors.
Connect the decoder to the satellite receiver's connector
if you have a decoder, AV1 (L-1) IN/OUT connector to
TV's connector, and AV2 (L-2) IN/DECODER connector
to the satellite receiver's connector. Then connect the
satellite receiver and TV.
Back of TV
EXT.1
Aerial
connector
21-pin SCART
connector
TV aerial
cable
ANTENNA IN
ANTENNA OUT
EXT.2
AV1 (L-1) IN/OUT ENTREE/SORTIE
ANTENNA
ANTENNE
IN
ENTREE
IN/DECODER
AV2 (L-2)
OUT
ENTREE/DECODEUR
SORTIE
NOTES:
Set "L-2 SELECT" to "A/V" (
You can use Automatic Satellite Programme Recording
function ( pg. 47) with this connection.
To record a programme via the satellite receiver, select L-2
mode by pressing AUX (number key "0") and/or PR so that
"L-2" appears on the front display panel.
To receive a scrambled broadcast, descramble the signal with
the satellite receiver.
For details, refer to the instruction manual of the satellite
receiver and decoder.
Aerial
Outdoor unit
Satellite cable
TV
OUT
S
SORTIE
AUDIO
L
OUT
SAT CONTROL
SORTIE
CONTROLEUR SAT
R
EN
pg. 65).
Satellite receiver
VCR DECODER
Decoder
Back of recorder
Mains outlet
71