Express Timer Programming - JVC 0503-AH-ID-JVE Instructions Manual

48
EN
Express Timer
Programming
You can programme this recorder to timer-record as many as 16
programmes.
If you do not know the S
HOW
you wish to record, use the following procedure to set your
recorder to timer-record the programme.
Before performing Express Timer Programming:
Make sure that the recorder's built-in clock is set properly.
Turn on the TV and select the AV mode.
Slide TV/CABLE/SAT switch to the right.
V number for the programme
IEW
?
TIMER RECORDING (cont.)
A
Turn on the recorder.
Press .
1
B
Load a cassette.
Insert a VHS (or S-VHS) cassette with the record safety
tab intact.
C
Access the programme screen.
A Press PROG.
B Press
to move the arrow to "PROGRAMME", then
w e
press OK.
When "PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMME" appears on the TV screen, you need to cancel
some of the currently set programmes. (
D
Select the programme date.
Press to move the arrow to the desired date,
w r e t
then press OK.
E
Select the recording deck.
A Press
to move the arrow to "RECORD TO", then
r t
press OK.
B Press
to select "HDD" or "VHS", then press OK.
r t
F
Set the start time and stop time of the
programme.
A Press
to move the arrow to "START" or "STOP",
t
then press OK.
B Press
to select the desired time, then press OK.
r t
G
Select the channel position.
A Press
to move the arrow to "TV PROG", then press
t
OK.
B Press
to select the desired channel, then press
r t
OK.
If you want to set a satellite programme, press the number key
"0" to change "TV PROG" to "SAT", then press VCR PR
C Press
to move the cursor to "CONFIRM", then press
t
OK.
H
Set the recording speed.
A Press
to move the arrow to "REC MODE", then
r t
press OK.
D Press
to select the desire mode, then press OK.
r t
pg. 50)
+/–
.