Edit To Or From Another Video Recorder - JVC HM-HDS1EU Instructions Manual

Hdd & s-vhs video recorder
Hide thumbs Also See for HM-HDS1EU:
Table of Contents

Advertisement

66
EN
Edit To Or From
Another Video
Recorder
Advantages of S-VHS video recorders
You can edit from VHS to S-VHS, S-VHS to VHS, or, from
S-VHS to S-VHS.
From VHS to S-VHS: Record VHS playback signals in the
S-VHS mode. Although the picture quality is inherently
limited by that of the original, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
From S-VHS to VHS: Because the picture quality of the
source material is very high, the edited tape has better
picture quality than those made by VHS-to-VHS editing.
From S-VHS to S-VHS: All signals will be transferred with
minimum degradation.
You can use your recorder as the source player or as the
recording deck.
A
Make connections.
Connect the player's 21-pin SCART connector to the
recorder's 21-pin SCART connector as illustrated on
page 67.
A When using your recorder as the source player ...
... connect its AV1 (L-1) IN/OUT connector to the
recording deck.
B When using your recorder as the recording deck ...
... connect its AV1 (L-1) IN/OUT or AV2 (L-2) IN/
DECODER connector to the source player.
C If another recorder is compatible with the Y/C signal ...
... connect your recorder's AV1 (L-1) IN/OUT
connector to another recorder.
With C connection ...
When using your recorder as the recording deck, set "L-1
INPUT" to "S-VIDEO" and "L-2 SELECT" to "A/V" (
65).
When using your recorder as the source player, set "L-1
OUTPUT" to "S-VIDEO" (
B
Select the recording deck.
Press HDD or S-VHS.
C
Set the input mode of recording deck.
With this video recorder, press AUX (number key "0")
and/or PR to select "L-1" for the AV1 (L-1) IN/OUT
connector, or "L-2" for the AV2 (L-2) IN/DECODER
connector, depending on the connector being used.
When using another recorder as the recording deck, refer to its
instruction manual.
When using the AV2 (L-2) IN/DECODER connector, set "L-2
SELECT" to "A/V" (
pg. 65).
D
Set the edit mode.
See "PICTURE CONTROL" on page 77.
E
Start the source player.
Engage the Play mode of the source player.
F
Start the recording deck.
Engage the Record mode of the recording deck.
EDITING (cont.)
pg. 64,
pg. 64).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents