JVC HM-HDS1EU Instructions Manual page 43

G
Set the recording speed.
Press MODE ( ).
p
For the VHS deck:
It is not possible to select EP mode if "COLOUR SYSTEM" is
(
set to "MESECAM". pg. 76
H
Set the VPS/PDC mode.
Press VPS/PDC to select "ON" or "OFF".
If "VPS/PDC ON" is displayed on the TV screen, VPS/PDC is
set to ON.
If "VPS/PDC OFF" is displayed on the TV screen, VPS/PDC is
set to OFF.
"VPS/PDC Recording" on page 45.
I
Set the category.
A Press
to move the
w e
arrow to "CATEGORY",
then press OK. The
category set screen
appears.
B Press
to select
w r e t
the desired category, then
press OK.
C Confirm the arrow is on
"RETURN", then press
OK. The programme
screen resumes.
J
Return to the normal screen.
Press to move the arrow to "CONFIRM", then
w r e t
press OK. "PROGRAMME COMPLETED" appears on the
TV screen for about 5 seconds, then the normal screen
appears.
If "PROGRAMME OVERLAPPED" appears on the TV screen,
see page 46.
K
Engage the recorder's timer mode.
Press (TIMER). The recorder turns off automatically and
#
" " appears on the front display panel.
#
To disengage the timer mode, press
)
PROGRAMME
CHILDREN CLASSICS COMEDY DRAMA
EDUCATIONS MOVIES MUSIC NEWS
RELIGIOUS SERIES SHOPPING SHOW
SPECIAL SPORTS OTHERS UNDECIDED
RETURN
INDEX
SELECT WITH
SELECT OK THEN PRESS [OK]
(TIMER) again.
#
NOTES:
To Change The Stop Time . . .
. . . press STOP +/– in step F. You can compensate for
anticipated programme schedule delays.
To Timer-Record Weekly Or Daily Serials . . .
. . . in step F, press WEEKLY (number key "9") for weekly
serials or DAILY (number key "8") for daily serials (Monday —
Friday). Either "WEEKLY" or "DAILY" appears on the TV
screen. Pressing the button again makes the corresponding
indication disappear.
During timer recording . . .
. . .it is not possible to disengage the timer mode.
. . .it is not possible to change the recording deck (HDD or
VHS).
It is not possible to timer-record a TV programme with a
S V number which starts with "0".
HOW IEW
Satellite Receiver Users
To timer-record a satellite broadcast using the S
system:
A Perform "Automatic Satellite Programme Recording" on
page 47.
B Perform steps A – K. In step F, the front display panel
shows "L2" for the channel position. In step H, you
cannot set "VPS/PDC" to "ON".
C Leave the satellite receiver's power on.
43
EN
V
HOW IEW