JVC HM-HDS1EU Instructions Manual page 33

Scan for Beginning of Programme with
VCR Navigation
The VCR Navigation can take effect for the programme
which has been recorded, and whose information has
been registered with this recorder. Once the VHS (S-VHS)
cassettes have been used for recording with this recorder,
they have the register number given by this recorder.
● Turn on the TV and select the AV mode.
● If the recorder is turned on with HDD deck selected,
there may be about 30 seconds' delay in starting to
show pictures on the screen.
A
Turn on the recorder.
Press 1.
B
Select the VHS deck.
Press S-VHS.
C
Access the VCR Navigation screen.
Press NAVIGATION. The
VCR Navigation screen
appears.
● If a registered cassette has
been loaded, the contents of
the loaded cassette will
appear. To select the
programme from the loaded
cassette, go to step F.
D
Search for the programme.
w e
Press to move the arrow to select one of the 3 search
types, then press OK or
A Select "DATE" if you want to search for the registered
programme by the recording date.
B Select "CATEGORY" if you want to search for the registered
programme by the category in which you have classified the
programme.
C Select "CASSETTE #" if you want to search for the programme
by each registered cassette.
E
Load the cassette.
After you have found the programme and checked its
cassette number, insert the cassette.
F
Select the programme.
Press w e to move the arrow on the index (small still
pictures) of the desired programme.
G
Start playback.
Press OK to move the arrow to "PLAY" on the Index
screen, then press OK again. Or simply press
playback starts.
H
Pause playback.
Press 9.
● To resume normal playback, press 4.
I
Stop playback.
Press 8.
EN
VCR NAVIGATION
0001
DATE CATEGORY
[12/06/01 TUE ] 120M BLANK 87M (SP)
BLANK
12/06/01 TUE 12/06/01 TUE 87min(SP)
12/06/01 TUE 12:00 – 12:30 PR. 8
PLAY STOP MODIFY
INDEX NAVIGATION
SELECT WITH
SELECT OK EXIT THEN PRESS [OK]
t
.
4
33
CASSETTE #
[UNDECIDED]
SP 30min
DELETE
. The