Timer Recording; Video Plus+ Timer Programming; Showview Timer Programming - JVC DR-M100S Instructions Manual

TIMER RECORDING

38
EN

VIDEO Plus+ Timer Programming

You can programme this unit to timer record as many as 8
programmes.
With the VIDEO Plus+ system, timer programming is greatly
simplified because each TV programme has a corresponding code
number which your unit is able to recognise.
You can use the remote control to enter the PlusCode number.
●
Turn on the unit.
●
Turn on the TV and select an input mode such as EXT1.
●
Make sure that the unit's built-in clock is set properly.
CANCEL
VIDEO Plus+
1
Load a recordable disc.
●
For details, refer to APlacing A DiscB (A pg. 9).
2
Press VIDEO Plus+ to
display the VIDEO
Plus+ screen.
3
Press the number keys
to enter the
APLUSCODE NO.B of a
programme you wish to
record, then press
ENTER.
●
If you have made a
mistake, press
CANCEL and input the correct number before you press
ENTER.
●
To clear all entered numbers at a time, press CLEAR(o).
●
If the number you entered is invalid, APLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRYB appears on the TV
screen. Input a valid APLUSCODE NO.B.
●
If AGUIDE PROGRAMME IS NOT SET SELECT CHANNEL
YOU WANT TO RECORDB appears on the TV screen, set
Guide Programme number manually.
●
When APROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMMEB appears on the TV screen, you need to cancel
some of the reserved programmes.
0-9
TIMER j
Selection Keys
(FGDE)
ENTER
RETURN
CLEAR (o)
VIDEO Plus+ PRGM
PLUSCODE NO. 1 2 3 4
DATE START STOP
DAILY/WEEKLY VPS/PDC REC MODE
SP
ON
OK
1 2 3
ENTER SHOWVIEW CODE WITH [0 - 9] KEYS
4 5 6
THEN PRESS [ENTER]
7 8 9
0
4
The APLUSCODE NO.B you entered and the matching timer
recording information are displayed on the TV screen. Check
the programme data. To cancel this setting, press RETURN.
IMPORTANT:
Make sure the channel position number you wish to record is
displayed. If not, see AVIDEO Plus+ System SetupB (A pg. 65)
and set the Guide Programme number correctly.
5
Press selection keys to
select desired recording
option as required.
6
Press selection keys to
select the desired
setting, then press
ENTER.
●
ADaily/Weekly
Recording FunctionB
(A pg. 38)
●
AVPS/PDC RecordingB
(A pg. 39)
●
ARecording ModeB (A pg. 35)
●
AModify Title NameB (A pg. 47)
7
Press ENTER to access the Programme Confirmation screen.
8
Press ENTER to complete the timer programming.
● To programme another timer, repeat steps 2 - 8.
●
If APROGRAMME OVERLAPPEDB appears on the TV screen,
see AWhen Programmes Overlap Each OtherB (A pg. 42).
9
Press TIMERj to engage the unit's timer mode.
● The unit turns off automatically and j appears on the front
display panel.
●
To disengage the timer mode, press TIMERj again.
IMPORTANT:
If you have moved to a different area or if a broadcasting
station's channel number has been changed, the wrong channel
number will be displayed on the VIDEO Plus+ programme
screen in step 4. When this happens, set the correct Guide
Programme number for that station.
●
There may be cases that the VIDEO Plus+ Timer Programming
function prolongs the stop time of the programming.
●
When two successive programmes are recorded with the VIDEO
Plus+ Timer Programming function, the ending of the first
programme or the beginning of the second programme may not
be recorded.
●
If the copy limited programme is received during timer recording,
the unit enters Record Pause mode. Recording starts again if it is
TV PROG
switched to a recordable broadcast during the time you
programmed.
Daily/Weekly Recording Function
NAME
You can record programmes with one of the following weekly/daily
timer settings.
WEEKLY
MON-FRI
MON-SAT
SUN-SAT
VIDEO Plus+ PRGM
PLUSCODE NO.
DATE START
05/07 SAT 20:00
DAILY/WEEKLY VPS/PDC
ON
EXIT CONFIRM
SELECT
PROG
Select to record a weekly programme.
Select to record a daily programme from Monday
through Friday.
Select to record a daily programme from Monday
through Saturday.
Select to record a daily programme from Sunday
through Saturday.
1 2 3 4 0 7 5 1 2
STOP TV PROG
20:30 1
REC MODE
NAME
LP
SET TIMER PROGRAMMING WITH [CURSORS]
THEN PRESS [ENTER]