TIMER RECORDING ON HDD/DVD DECK
44
EN
S
V
Timer Programming
HOW
IEW
You can programme this unit to timer record as many as 16
programmes.
With the S
V
system, timer programming is greatly
HOW
IEW
simplified because each TV programme has a corresponding code
number which your unit is able to recognise.
You can use the remote control to enter the S
●
Make sure that the unit's built-in clock is set properly.
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/SAT/DVD switch to DVD.
0 – 9
ENTER
DISPLAY
VPS/PDCj
1
Load a recordable disc if recording to DVD.
2
Press PROGRAMME to access the programme top screen.
3
Press selection keys to select ASHOWVIEWB, then press
ENTER.
●
When APROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMMESB appears on the TV screen, you need to
cancel some of the reserved programmes. (A pg. 47)
4
Press the number keys to
enter the S
V
number
HOW
IEW
of a programme you wish to
record.
OR
Press selection keys to select
the desired number key on the
screen, then press ENTER.
Repeat to enter all required
numbers.
●
If you have made a mistake, press selection keys to select
ADELETEB or ADELETE ALLB, then press ENTER and input the
correct number before you press ENTER again.
5
Press selection keys to select ARECORD TOB, then press
ENTER. Press selection keys to select the desired recording
deck, then press ENTER.
6
Press selection keys to select ACONFIRMB, then press
ENTER.
●
If the number you entered is invalid, ASHOWVIEW NO. ERROR
CONFIRM SHOWVIEW NO. THEN RETRYB appears on the TV
screen. Input a valid S
HOW
●
If AGUIDE PROGRAMME IS NOT SET SET GUIDE
PROGRAMME THEN RETRYB appears on the TV screen, set
Guide Programme Numbers manually. (A pg. 74)
V
number.
HOW
IEW
CABLE/SAT
TV
DVD
PROGRAMME
Selection Keys
FGDE
RETURN
1
1
3
3
PROGRAMME > SHOWVIEW (1/2)
2
2
2
SHOWVIEW NO.
1 2 3 4
1
2
SELECT WITH @
THEN PRESS [ENTER]
4
5
PRESS [PROGRAMME]
7
8
TO EXIT
0
DELETE
RECORD TO
PROGRAMME
ENTER
SELECT
EXIT
V
number.
IEW
7
The S
HOW
recording information are displayed on the TV screen. Check
the programme data.
●
To cancel this setting, press RETURN.
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see AS
set the Guide Programme number correctly.
8
Press selection keys to select the desired recording option as
required. Press selection keys to select the desired setting,
then press ENTER.
●
AINPUT TITLEB (A pg. 50, AModify Title NameB)
●
ACATEGORYB (A pg. 51, AModify CategoryB)
●
AVPS/PDCB (A pg. 45, AVPS/PDC RecordingB)
●
AWEEKLY/DAILYB (A pg. 45, AWeekly/Daily RecordingB)
●
AREC MODEB (A pg. 32, ARecording ModeB)
9
Press selection keys to select AOKB, then press ENTER to
access the Programme Confirmation screen.
10
Press selection keys to select AEXITB, then press ENTER to
complete timer programming.
●
To programme another timer, press selection keys to select
ACONTINUEB, then press ENTER.
●
If APROGRAMME OVERLAPPEDB appears on the TV screen,
delete or modify the programmes.
NOTES:
●
There may be cases that the S
function prolongs the stop time of the programming.
●
When two successive programmes are recorded on a DVD-RW
disc with the S
beginning of the second one may be left off the recording.
●
If the copy limited programme is received during timer recording,
the unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you
programmed.
IMPORTANT:
If you have moved to a different area or if a broadcasting
station's channel number has been changed, the wrong channel
number will be displayed on the S
in step 7. When this happens, set the correct Guide Programme
number for that station. (A pg. 74, AS
3
6
9
DELETE ALL
DVD
CONFIRM
V
number you entered and the matching timer
IEW
V
System SetupB (A pg. 74) and
HOW
IEW
V
HOW
IEW
V
Timer Programming function, the
HOW
IEW
V
HOW
HOW
Timer Programming
programme screen
IEW
V
System SetupB)
IEW