Page 1
BLU-RAY DISC & HDD RECORDER SR-HD1700US/SR-HD1350US/ INSTRUCTIONS SR-HD1700EU/SR-HD1350EU/ SR-HD1700ER/SR-HD1700AG OPEN/ CLOSE INPUT MEDIA SELECT ONE TOUCH STANDBY/ON MODE SELECT BD/SD DUBBING RESET STOP PLAY PAUSE HDV/DV IN For Customer Use: Enter below the Model No. and Serial No. which is located Please read the following before getting started: on the body.
Safety Precaution Safety Precaution CLASS 1 LASER PRODUCT Dear Customer, Thank you for purchasing the JVC BLU-RAY DISC & HDD REPRODUCTION OF LABELS WARNING LABEL INSIDE OF THE UNIT recorder. Before use, please read the safety information and precautions to ensure safe use of your new unit.
Safety Precaution IMPORTANT SAFETY INSTRUCTIONS CAUTION: Changes or modifications not approved by JVC could void user’s 1) Read these instructions. authority to operate the equipment. 2) Keep these instructions. 3) Heed all warnings. This device complies with Part 15 of FCC Rules.
Safety Precaution DISCLAIMER OF LIABILITY JVC shall not be liable for any loss relating to the unit’s failure to properly record, store or playback any content (video, audio or otherwise) for any reason whatsoever. Any applicable warranties shall only cover replacement or repair of the effected unit, and shall not apply to recovery or replacement of lost content.
Page 5
4. DO NOT place anything which might spill on top of the unit or remote control. European representative of JVC KENWOOD Corporation is: (If water or liquid is allowed to enter this equipment, fire or JVC Technical Services Europe GmbH electric shock may be caused.)
Page 6
Safety Precaution Use the supplied power cord. POWER CONNECTION (If not, fire or electric shock may be caused.) The power supply voltage rating of this product is AC 220 – DON'T continue to operate the equipment if you are in any doubt 240 V (For European countries, Asian countries, and United about it working normally, or if it is damaged in any way -- switch Kingdom).
Page 7
DISCLAIMER OF LIABILITY encoded by a consumer engaged in a personal and non- JVC shall not be liable for any loss relating to the unit’s failure to commercial activity and/or was obtained from a video provider properly record, store or playback any content (video, audio or licensed to provide AVC/VC-1 Video.
Contents Option menu list ..............57 Contents Video Playback Operation ............ 58 Playing Videos on a BD/DVD ..........60 Playing Videos on the HDD ..........61 Safety Precaution Playing Videos on a SD Card ..........61 Playing Still Images (JPEG) ..........62 Safety Precaution ..............
SDHC : SDHC Card : Music compact disc In addition to AVCHD, HDV and DV, JVC Everio file formats are also compatible, and digital dubbing can be done. JPEG : JPEG (still picture) file disc Digital interface that allows for camcorder...
AACS is the abbreviation for advanced access content copyright works before using this unit in the correct system. manner. Under no circumstances shall JVC KENWOOD take any responsibility for any infringements of copyright Handling precautions caused by the customer when using this unit. The customer...
Places that are exposed to direct sunlight Do not connect any video cameras that are Places near heat-generating equipment not made by JVC to the USB terminal Inside a car that is under the sun with the windows tightly Doing so may result in malfunction.
Getting Started SD Cards (Continued) Discs BD video data BD recording formats BDAV mode You can erase BD Video data from the SD card as follows. 1 Insert the SD card which has BD video data Videos can be edited (chapter edit etc) and new videos can stored on it, into the [SD SLOT] be added to the disc.
Page 13
DTS music CDs are also playable. *1 : SR-HD1700US/SR-HD1350US/SR-HD1700AG: A, SR-HD1700EU/SR-HD1350EU: B, SR-HD1700ER: C *2 : SR-HD1700US/SR-HD1350US: 1, SR-HD1700EU/SR-HD1350EU: 2, SR-HD1700AG: 3, SR-HD1700ER: 5 Memo: If 8 cm discs are used, only playback can be performed. The disc cannot be used for recording or editing.
Getting Started Precautions on the Use of Disc storage Discs Avoid storing the disc at the following locations. Places that are subject to high humidity, dust, or mold growth Maintenance of discs Places that are exposed to direct sunlight or near a heater Dirt attached to the disc, such as fingerprints and dust, may Inside a car during summer...
Getting Started On-screen Displays Status display Displays the current settings and operating status (such as playback, pause) of this unit. Pressing the [ON SCREEN] button on the remote control displays the status. To cancel the display, press the [ON SCREEN] button again. You can select whether to display the statuses by changing the settings in the settings menu.
Getting Started Name and Function of Parts Front panel A [ A ] button N Playback control buttons Switches operation on or off. [ I ] button Plays back the data. B Disc tray [ o ] button C [ M ] button Stops playback/recording.
Getting Started Display window English messages appear for a number of operations. HDD/DISC remaining level display (Examples) Dubbing display : When the power plug is inserted HELLO Disc status display : When reading the disc READING HDMI output display ONSCREEN : Upon moving to the playback navigation Memo: screen The brightness of the display window can be adjusted.
Getting Started H [ J / K / H / I ] Name and Function of The cursor can be moved to select an item. Parts (Continued) I [OPTION] Displays the option screen. J [ S ] Remote control Move to the chapter just before the current chapter. K [ O ] Fast reverses the video and starts slow playback.
Getting Started e [ I ] Remote control codes Plays the video. By setting a remote control code for the unit and remote f [ W ] control, you can prevent two recorders from operating Pauses the video that is currently playing. simultaneously using the remote control for this unit.
Preparation Memo: Connecting a Monitor After connecting a component video cable, change the unit setting to “COMPONENT OUTPUT”. To display video images from this unit, connect it to a monitor. For details, refer to “COMPONENT OUTPUT” (A page This unit supports connections using “HDMI cable”, 90) .
Preparation Connecting an Amplifier Connecting a Video Deck or Other Equipment Connecting an audio amplifier Connecting a video camera Connecting using an optical digital cable Connecting via the i.LINK terminal INPUT MEDIA SELECT ONE TOUCH MODE SELECT BD/SD DUBBING HDV/DV IN Memo: Remove the protection cap of the cable before connecting.
Preparation Connecting External Connecting using a LAN cable (only for SR-HD1700) Devices Connecting a wired remote control External operation is enabled by connecting to a PC or similar device using a LAN cable. For details on external operation, refer to “External Control (only for SR-HD1700)”...
Preparation 4 Select “CLOCK SET”, and press the [OK] button Setting and Displaying The Clock Set menu screen appears. Date/Time Set the date/time of the built-in clock as follows. The recording date/time is stored on the disc. Setting the date/time Set the date/time of the built-in clock as follows.
Page 24
Preparation 3 Select “CLOCK SET/DISPLAY”, and press the Setting and Displaying [OK] button Date/Time (Continued) The Clock Set/Display menu screen appears. 6 After setting is complete, select “ENTER”, and press the [OK] button Doing so exits date/time setting, and returns to the initial screen.
Page 25
Preparation 4 Select “TIME DISPLAY CHOICE”, and press the Memo: [OK] button The date display style will be applied in the following information displays. The Time Display menu screen appears. Recording date of the title that is shown in the playback navigation screen (The recording date will be shown in place of the title if the title has not been input).
Make use of a BD/DVD disc that For MOV format videos, only videos in the MOV format (SP supports high-speed recording. mode and HQ mode) taken using JVC ProHD MEMORY CARD CAMERA RECORDER GY-HM series are Dubbing in a specific recording mode compatible.
85) in the settings menu to “4:3” before recording or importing. Only re-encoding will be performed when dubbing a title that is recorded or imported with a setting other than “4:3”. MOV* : MOV format files recorded in the SP mode and HQ mode using the JVC ProHD MEMORY CARD CAMERA RECORDER GY-HM series...
Note: If a disc is formatted using an equipment not manufactured by JVC, the disc may not be read correctly even though it corresponds to the chart below. In this case, reformat the disc using this unit, or make use 3 Select “FORMAT”...
Page 29
Dubbing/Importing 5 Select “YES”, and press the [OK] button in the Cancel formatting format confirmation screen 1 Press the [OPTION] button while formatting Formatting starts. 2 Select “STOP”, and press the [OK] button After formatting is complete, a “THE DISC HAS BEEN A confirmation screen to stop formatting appears.
Page 30
Dubbing/Importing 4 Select “YES”, and press the [OK] button Formatting (Continued) Formatting an SD Card 1 Insert the SD card to be formatted into the [SD SLOT] With the terminal side facing down, insert the SD card until a “click” sound is heard. Formatting starts.
Dubbing/Importing Recording Modes Maximum recording time for each recording mode You can specify a recording mode according to the intended use. Setting the video to a high picture quality shortens the maximum recording time, while setting to a lower picture quality lengthens the recording time. Refer to the following table for the maximum recording time in the respective modes.
Page 32
FR mode is displayed as the recording mode in the following cases. FR mode during import into HDD During import of SD-VIDEO (JVC Everio MPEG2 PS) titles via high-speed dubbing. During import of data via high- speed dubbing from DVD-VR discs recorded using other units.
Titles of two or more scenes cannot be combined if the recording criteria, such as video size, are different. on the monitor Import of MOV files recorded using JVC GY-HM series SP mode 1080i requires a duration that is about 1.3 times longer than the usual time.
Dubbing/Importing Importing Data from a Full import BD/DVD to the HDD 1 Select “FULL IMPORT” in the import selection screen, and press the [OK] button Data can be imported from a BD/DVD to the HDD as follows. A check mark is added to the “FULL IMPORT” item. File formats that can be imported 2 Select “NEXT”, and press the [OK] button : BDMV, BDAV, AVCHD, DVD-VR, DVD-...
Page 35
Dubbing/Importing 5 Select “START”, and press the [OK] button 3 Select “RECORDING MODE”, and press the [OK] button Importing of the titles starts. A pop-up menu appears. After titles are successfully imported, a “DUBBING IS COMPLETED” message appears on the monitor. 4 Select the “RECORDING MODE”...
Page 36
Dubbing/Importing 1 Select “RECORDING MODE”, press the [OK] Importing Data from a button, and select “RECORDING MODE” from BD/DVD to the HDD the recording mode selection screen Select the “RECORDING MODE” option. (Continued) 7 Select “START”, and press the [OK] button For details, refer to “Recording Modes”...
Titles of two or more scenes cannot be combined if the recording criteria, such as video size, are different. Import of MOV files recorded using JVC GY-HM series SP mode 1080i requires a duration that is about 1.3 times longer than the usual time.
Page 38
Dubbing/Importing 4 Select “START”, and press the [OK] button Importing Data from a USB- compatible Device to the HDD (Continued) After titles are successfully imported, a “DUBBING IS COMPLETED” message appears on the monitor. Importing of titles starts according to the sequence in the created title list.
2 Select “START”, and press the [OK] button Import of MOV files recorded using JVC GY-HM series SP mode 1080i requires a duration that is about 1.3 times longer than the usual time.
Page 40
Thumbnails will not be displayed when a title is selected. button to select the format you want to display. MOV* : MOV format files recorded in the SP mode and HQ mode using the JVC ProHD MEMORY Canceling importing CARD CAMERA RECORDER GY-HM series...
Doing so may result in loss or damage of the titles. The import selection screen appears. For example, during full import of HDV content from JVC GY-HD100 via i.LINK connection, the beginning of the image may not be captured if GY-HD100 is not set as Imports data from the beginning follows.
Dubbing/Importing 3 Select “RECORDING MODE” and press the [OK] Importing Data from an button to display the pop-up menu i.LINK-compatible Device to Select “XP”, “SP”, “LP”, or “EP” from the “RECORDING MODE” option. the HDD (Continued) Select “XP”, “SP”, “LP”, or “EP” from the “RECORDING MODE”...
Dubbing/Importing To import to the HDD, the capacity of the HDD must be Importing Data from a LAN- twice the size of the transfer files. compatible Device to the The available disk space in the HDD is stated in the Readme.txt (*1) file.
② Select “DUB”, and press the [OK] button When a BDAV/BDMV disc is created (high-speed ③ Follow Steps 3 to 4 of “Preparation” dubbing) by importing content recorded in the JVC Dubbing titles GY-HM series (SP mode or HQ mode).
Page 45
Dubbing/Importing Memo: Memo: High-speed dubbing Press the [MARK] button. A check mark will appear beside the title. Select this option if you want to significantly shorten the All titles with a check mark can be added to the list at the time required for dubbing.
Page 46
Dubbing/Importing “TITLE 1” Dubbing a Title from the The first title on a finalized disc will be played back HDD to a BD/DVD automatically when it is inserted into another device. Memo: (Continued) “NONE” cannot be selected for “FIRST PLAY” for BDMV. ②...
Dubbing/Importing 4 Select “NEXT”, and press the [OK] button Dubbing Still Images from Memo: the HDD A message appears on the monitor when dubbing cannot be performed in the following cases. When this occurs, replace the disc or SD card with one that is usable. Still images stored in the internal HDD can be dubbed to a BD-RE or an SD card as follows.
Page 48
Dubbing/Importing Dubbing Still Images from Dubbing from the Playback Navigation screen the HDD (Continued) Dubbing can also be performed from the Playback Navigation screen. 6 Select “START”, and press the [OK] button 1 Select the still images to dub, and press the [OPTION] button Dubbing starts.
Dubbing/Importing Memo: Enabling Playback on To cancel the finalizing operation, select “NO” and press Other Devices (Finalizing) the [OK] button. 5 Setting the top menu items DVD-R and DVD-RW discs may need to be finalized before they can be played on other DVD players. BD-R discs need to be finalized before they can be played on other BD players.
Dubbing/Importing Enabling Playback on Unfinalizing a disc Other Devices (Finalizing) Only DVD-RW discs that are finalized on this unit can be unfinalized. (Continued) After a disc is unfinalized, addition of new titles and editing are possible. ③ Select “CHANGE DISC MENU BACKGROUND” to Note: select a background image for the top menu All discs except DVD-RW (VR mode) cannot be unfinalized.
Dubbing/Importing 3 Set the number of discs to copy using the [ J / K ] Copying the Entire Disc buttons You can specify up to a maximum of 10 discs. Copying the entire disc allows all contents on a BD (BDAV, BDMV) or DVD (AVCHD, DVD-Video, DVD-VR) to be copied onto another disc.
Page 52
Dubbing/Importing After copy is complete, the data copied onto the HDD will Copying the Entire Disc be deleted. (Continued) Select “CANCEL” from the menu, and press the [OK] button to cancel disc copying. 8 Select “START”, and press the [OK] button The disc tray will close automatically.
Recording Direct recording to discs Recording Using External Inputs The video from the external device can be recorded to the optical disc directly. Videos on an external device that is connected to i.LINK 1 Press the [BD/SD] button on either this unit or (HDV/DV) or video/S-video input can be recorded to the HDD.
Page 54
Recording Recording Using External Inputs (Continued) RECORDABLE MEDIA RECORDING MODE RECORDABLE MEDIA DVD-R/RW BD-R/RE BD-R/RE (VR Format/Video (BDAV format) (BDMV Format) Format) AF (HD) AN (HD) AL (HD) AE (HD) XP (SD) DV/L-1 DV/L-1 SP (SD) DV/L-1 DV/L-1 LP (SD) DV/L-1 DV/L-1 EP (SD)
39) . video title is displayed at the top right corner of the screen. MOV* : MOV format files recorded in the SP mode and HQ mode using the JVC ProHD MEMORY CARD CAMERA RECORDER GY-HM series Operating Playback Navigation...
Page 56
Playing Back Using Playback Navigation Switching between video and still image displays (Continued) You can switch the display between the video thumbnail list screen and still image thumbnail screen. Switching between thumbnail and list When the video thumbnail list screen is displayed displays You can switch between the thumbnail display and list display of a video.
Playing Back 2 Select an operation option, and press the [OK] EDIT INFO button Switches to the menu screen of the sub-items. MODIFY TITLE NAME/MODIFY GROUP NAME Options that cannot be operated are displayed in gray and Switches to the rename screen for the selected title/ cannot be selected.
Playing Back Video Playback Operation Frequently used button operations [ I ] button If the stop position (resume point) is memorized in the selected video, pressing the button plays back the video from this position. The video may not resume playback depending on the media and settings used.
Page 59
Playing Back Useful button operations [ v ] button During normal playback, 1.3x playback, slow motion [PB MODE] button playback, fast forward, or fast reverse, pressing the button Displays the Playback Settings screen, which enables you moves the playback position forward by about 30 seconds. to modify the settings.
Playing Back Playing Videos on a Playing an EverioBackup Disc* BD/DVD : Data disc containing high-definition videos EverioBackup disc* that are recorded in the MPEG2 format using a DVD writer for Everio. Playback starts automatically after a BD/DVD is set. If the Auto Play feature is disabled, play the title using 1 Set the disc on the disc tray Playback Navigation.
MOV* : MOV format files recorded in the SP mode and HQ mode using the JVC ProHD MEMORY CARD CAMERA RECORDER GY-HM series MXF* : MXF format files recorded in the SP mode and...
Playing Back Playing Still Images (JPEG) Enabled button operations during still image playback Still images stored on the HDD/BD/DVD/SD card can be [ I ] button played back using Playback Navigation. Pressing the button when a title/group is selected starts playback of the still images in the title/group in a slideshow.
Playing Back Changing Playback Playback settings Settings Displaying the playback settings menu 1 Press the [PB MODE] button on the remote control unit during the playback of a title The Settings Menu screen appears. The playback settings menu can only be displayed during the playback of a title.
Playing Back Playback Settings Menu DIGITAL NOISE REDUCTION (Continued) The following items can be set. Setting Description Values Video settings Turns off DNR (Digital Noise Reduction). Reduces noise that is prominent in images of lengthy videos. PROGRESSIVE OUTPUT The following items can be set. Setting Description Values...
Editing Editing Before editing This unit mainly edits video images stored on the HDD. To edit video images stored in a disc or SD card, do so after importing them to the HDD. Data on a finalized disc cannot be edited. To edit a finalized disc, you have to either unfinalize the disc, or do so after importing the data to the HDD.
Editing Entering Characters Entering characters 1 Enter characters using the [ 0 ]-[ 9 ], [Z] or [#] Names can be changed or given to stored videos or groups. buttons You can enter characters while referring to the input on the 2 After character input is complete, press the monitor.
Editing 5 Select “GROUP”, and press the [OK] button Grouping The selected titles and groups are now grouped together. Multiple titles stored on the HDD can be combined into a group. Memo: Only video data stored on the HDD can be grouped. Grouping 1 Press the [NAVIGATION] button on the remote control unit...
Page 69
Editing 4 Select “YES”, and press the [OK] button 3 Press the [OPTION] button on the remote control unit All titles within the selected group are ungrouped. A pop-up option list appears. 4 Select “DO NOT GROUP”, and press the [OK] button A confirmation screen for group exclusion appears.
Editing Changing the Title/Group Deleting a Title/Group Name Titles/groups can be deleted. When you delete a group, all titles contained within the group are deleted. The saved title/group name can be changed as follows. Memo: Memo: When a title/group is deleted from the HDD, BD-RE, or A title/group name can be added to video data stored on DVD-RW, the remaining space on the media increases the HDD, BD-RE, BD-R, DVD-RW, or DVD-R, and the...
Editing 4 Select “PROTECT”, and press the [OK] button Turning On Title/Group If only a single title was selected in step 2, a confirmation Protection screen for title protection will appear. Titles/groups can be protected. Editing and deletion cannot be performed on protected titles/ groups.
Editing 4 Select “UNPROTECT”, and press the [OK] button Turning Off Title/Group If only a single title was selected in step 2, a confirmation Protection screen for turning off protection will appear. Protection of a title/group can be turned off. Titles/groups can be edited and deleted after their protection is turned off.
Editing 5 Edit the playlist accordingly by selecting Creating a Playlist chapters from the source title according to your preference A playlist can be created from the video titles on the HDD. Edit the playlist. Playlists can only be created for titles that are stored on the For details, refer to “Editing the playlist”.
Editing 4 Select “CHANGE”, and press the [OK] button Editing a Thumbnail The displayed still image now becomes the thumbnail image. Thumbnails (index images) can be changed to a still image 5 Select “CONFIRM”, and press the [OK] button according to your preference. Doing so ends the editing of thumbnails.
Editing Editing a Chapter Editing a chapter 1 Press the [EDIT] button on the remote control Creating a chapter mark for a saved title enables you to find a unit specific scene within the title. The Edit menu screen appears. Memo: 2 Select “CHAPTER EDIT”, and press the [OK] All chapter editing functions can be performed on titles...
Page 76
Editing Editing a Chapter Deleting a video chapter 1 Select the chapter for which you want to delete (Continued) the video from the chapter edit screen 2 Press the [DELETE] button on the remote control Chapter mark insertion (divide chapter) unit 1 Play the video, and press the [W] button to stop A confirmation screen for deleting the chapter appears.
Editing 6 Select “EXECUTE”, and press the [OK] button Dividing A confirmation screen for performing dividing appears. You can select a saved title and divide it into two titles. Memo: Dividing can only be applied to titles stored on the HDD. Titles that are protected cannot be divided.
Editing Dividing (Continued) Delete Scenes Memo: Unwanted scenes of a saved title can be deleted. To cancel the dividing operation, select “CANCEL” and Doing so helps to increase the free space on the disc. press the [OK] button. Memo: Alternatively, you can press the [RETURN] button to cancel Deleting scenes can only be applied to titles stored on the the divide operation and return to the initial screen.
Page 79
Editing 5 Select “EXECUTE”, and press the [OK] button ① Play the video, and press the [W] button at the point where you want to start the delete operation A confirmation screen for performing scene delete appears. ② Select “START”, and press the [OK] button 6 Select “EXECUTE”, and press the [OK] button Scene deletion starts.
Editing Changing the Disc Name Changing the Shooting Date/Time The name of a BD or DVD disc can be changed as follows. 1 Set the BD or DVD for which the disc name is to The date/time of the stored video can be changed as follows. be changed on the disc tray The shooting date/time of videos stored on the HDD can be 2 Press the [MEDIA MANAGE] button on the...
Editing 5 Select “ENTER”, and press the [OK] button Mode conversion The modified shooting date/time is saved. Memo: You can convert HD quality video titles saved on the HDD if Alternatively, you can press the [RETURN] button to cancel they are recorded in the DR, AVC, AF, AN, AL, or AE mode. the shooting date/time modification and return to the initial : Seamless conversion can be performed to Seamless...
Settings Menu Changing Settings of this DYNAMIC RANGE CONTROL ......(A page 86) DOWN MIX ............(A page 86) Unit DIGITAL OUT ........... (A page 87) Settings changed in the Settings Menu screen are stored on PCM DOWN SAMPLING ......(A page 87) this unit even when its power is turned off.
DIMMER (POWER ON) REMOTE CONTROL CODE For setting the brightness of the display window when the For remote control units compliant with JVC’s products, power is turned “On”. different remote control codes can be specified for those that Setting Values Description are used with this unit.
Settings Menu Setting Menu List PLAYBACK SETTING (Continued) QUICK STARTUP For turning on/off the display window during quick startup and standby mode. Setting Description Values Starts up in the normal way. Display window turns off during standby mode. Operation is speedily enabled after turning on the power.
Settings Menu RECORD RESUME The stop position can be stored when playback of a BD- Video, DVD-Video, BDMV, AVCHD, finalized discs, or SD card is stopped halfway. Setting Values Description Resume information is not stored. Stores resume information. Memo: Resume information is stored at all times for other discs as well as the HDD regardless of this setting.
Settings Menu Setting Menu List AUDIO (Continued) DISC RECORDING AUDIO For changing the settings of audio to be recorded to the disc when in the AF, AN, AE or AL mode. Setting Description Values AUTO Records “Stereo”, “Surround” or “Dual broadcast”...
Settings Menu DTS-HD DIGITAL OUT For setting audio output to “BITSTREAM” or “PCM”. Set this item according to the device connected to the digital Setting Values Description audio output terminal (optical digital). PCM DOWN SAMPLING BITSTREAM Use this setting when connecting a device that is able to decode “DTS-HD”.
Settings Menu Setting Menu List CONNECTION (Continued) DISPLAY MONITOR TYPE For setting the aspect ratio according to the connected monitor. Setting Description Values ON SCREEN GUIDE 16:9 Set to this value when connected to For displaying operation details. monitors with 16:9 aspect ratio. Setting Values Description 16:9FULL...
Page 89
Settings Menu Memo: HDMI OUTPUT RESOLUTION This is applicable when an x.v.Color compatible monitor is Setting Values Description connected. AUTO Automatically selects an appropriate Deep Color resolution according to the connected Setting Description device. Values 480p (NTSC) Fixes the resolution at 480p or 576p. AUTO Set to this value when a “Deep Color”...
Settings Menu Setting Menu List NETWORK SETTING (only for SR-HD1700) (Continued) COMPONENT OUTPUT For setting the resolution of video output from the [COMPONENT VIDEO OUT] terminal. Setting Values Description 480i (NTSC) Sets output to “480i” or “576i”. 576i (PAL) 480p (NTSC) Sets output to “480p”...
Others Locking the Disc Tray Turning on the Mode Lock By turning on the lock for the disc tray, the tray cannot be Turning on the mode lock disables all operations using the opened or closed using the [M] button. buttons on the unit and remote control, except for “Play”...
Others External Control (only for SR-HD1700) This unit can be controlled using a PC, etc. by connecting them with an RS-232C or LAN cable. RS-232C Specifications : Non-synchronous Pin layout Mode : 8 bits Character length : Odd Parity check Start bit Stop bit PIN No.
Others Command Table Lower Order Higher Order Complete Error Cassette Target Ready Play Stop Still Clear Sense Title Chapter Sense Chapter Title Date Clock Search Search Preset Preset Finalize Cancel Disc MEDIA NEXT PREV Setup DOWN RIGHT LEFT Next Prev Remote Disc Erase...
Others External Control (only for SR-HD1700) (Continued) Command Operation Commands Commands for operating functions such as PLAY and REC on the BLU-RAY DISC & HDD RECORDER Command Description Returns to the previous title. Functions like the S button on the remote control. Plays the selected deck.
Page 95
Others Rec: Starts recording at the selected deck when a Rec Request is received. Command Target: F0 h 34: For selecting HDD deck. F0 h 38: For selecting BD deck. F0 h 3C: For selecting SD deck. Rec/Dub Request: For issuing approval for recording.
Page 96
Others External Control (only for SR-HD1700) (Continued) 9F : Remote Data The remote control codes for controlling the wired remote controller via RS-232C is as shown in the following table. The codes apply to all three HDD, BD and SD deck unless otherwise stated. Code Items Remarks...
Page 97
Others NAVIGATION OPTION L-1 Y/C INPUT SELECT HDD Deck only RETURN L-1 COMPOSITE INPUT HDD Deck only SELECT COLOR KEY BLUE PLAYBACK SETTING COLOR KEY RED DELETE JOG -1/6 INFORMATION JOG +1/6 CORRECT JOG +1 FWD FRAME INSTANT REPLAY MODE LOCK EDIT HDCP AUTO COLOR KEY GREEN...
Others External Control (only for SR-HD1700) (Continued) Subtitle Selection B8 : Subtitle Selection Byte Byte Byte Byte Byte Byte Byte Byte JAPANESE ENGLISH GERMAN FRENCH ITALIAN SPANISH DUTCH SWEDISH NORWEGIAN FINNISH DANISH “Language Code List” (A page 104)
Page 99
Others Audio Language Selection B8 : Audio Language Selection Byte Byte Byte Byte Byte Byte Byte Byte JAPANESE ENGLISH GERMAN FRENCH ITALIAN SPANISH DUTCH SWEDISH NORWEGIAN FINNISH DANISH “Language Code List” (A page 104)
Page 100
CTL Data Sense: For acquiring the lapse counter when there is a media in the selected deck. (*) JVC Status Sense: Returns data from the unit. (*) VTR Ind: A command for checking whether the connected device is the external recorder.
Page 101
Others Title/Track Sense under “ORIGINAL” 1st Byte 2nd Byte 3rd Byte 4th Byte Title/Track Sense (ORIGINAL) 30 Hundreds Tens Ones E.g. (345) E.g. : When the current title under “ORIGINAL” is the 345th title. Title/Track Sense in “PLAY LIST” 1st Byte 2nd Byte 3rd Byte 4th Byte Title/Track Sense (PLAY LIST) 38 Hundreds Tens Ones...
Page 102
Others External Control (only for SR-HD1700) (Continued) Status Data Sense For acquiring the remaining time in the current recording mode in hours, minutes and seconds for HDD/BD/SD. 1st Byte 1st Byte 1st Byte 2nd Byte 3rd Byte 4th Byte 5th Byte STATUS SENSE HDD/BD/SD...
Page 103
CTL Data Sense Hr (Tens) Hr (Ones) Min (Tens) Min (Ones) Sec (Tens) Sec (Ones) Frame (Tens) Frame (Ones) E.g. (01:23:45) E.g. : When time lapse counter is 1 hr 23 min 45 sec. Frame is fixed as 0. JVC Status Sense 1st Byte 2nd Byte 3rd Byte...
Others Language Code List Code Language Code Language Code Language Afar Hindi Ossetian Abkhazian Hiri Motu Panjabi Afrikaans Hungarian Persian Akan Igbo Pali Albanian Icelandic Polish Amharic Portuguese Arabic Sichuan Yi Pashto Aragonese Inuktitut Quechua Armenian Interlingue Rhaeto-Romance Assamese Interlingua (International Romanian Auxiliary language Association) Avar...
Page 105
Others Divehi Luba-Katanga Tagalog Dutch Ganda Thai Dzongkha Macedonian Tibetan English Marshallese Tigrinya Esperanto Malayalam Tongan Estonian Māori Tswana Marathi Tsonga Faroese Malay Turkmen Fijian Malagasy Turkish Finnish Maltese French Moldavian Uighur Western Frisian Mongolian Ukrainian Fulah Nauruan Urdu Georgian Navajo Uzbek German...
Others Country Code List Code Country Name Code Country Name Code Country Name Andorra Gambia Niue United Arab Emirates Guinea New Zealand Afghanistan Guadeloupe Oman Antigua and Barbuda Equatorial Guinea Panama Anguilla Greece Peru Albania South Georgia and South Sandwich Polynesia Islands Armenia...
Page 107
Others Cook Islands Saint Lucia Chad Chile Liechtenstein French Southern Territories Cameroon Sri Lanka Togo China Liberia Thailand Colombia Lesotho Tajikistan Costa Rica Lithuania Tokelau Cuba Luxembourg Turkmenistan Cape Verde Latvia Tunisia Christmas Island Libya Tonga Cyprus Morocco East Timor Czech Republic Monaco Turkey...
Press the [NAVIGATION] or [SET UP] button SD-VIDEO(HD)* : SD-VIDEO (JVC Everio MPEG2 TS) Turning off the power for the TV will also turn the power off : MOV format files recorded in the SP mode MOV* for this unit automatically.
Others Troubleshooting Problem Symptom Action Reference Page Power does not turn on The “HELLO” message remains Press the [RESET] button on the front (A page 16) displayed, and the unit does not start panel. If it does not start up, stop using this unit, unplug the plug from the outlet, and bring it to the dealer or Service Center.
Page 110
Others Troubleshooting (Continued) Problem Symptom Action Reference Page Dubbing cannot be “NEXT” cannot be selected when a title (A page 31) Dubbing may start when you return to performed that cannot be dubbed is chosen. recording mode selection to change the recording mode.
Page 111
Others Problem Symptom Action Reference Page The remote control unit The battery of the remote control unit Change new batteries for the remote (A page 19) does not work has run out. control. The remote control code of this unit Change the “REMOTE CONTROL CODE”...
Others Frequently Asked Questions on Dubbing Problem Symptom Cause Action Reference Page Unable to dub “SOME TITLES (A page 44) Titles that cannot be dubbed Select a setting other than “HIGH- from HDD CANNOT BE (A page 45) at high speed are selected SPEED DUBBING”...
Others Memo: When “SOME TITLES CANNOT BE DUBBED” appears after selecting high-speed dubbing, check the followings. Titles that are copyright-protected cannot be dubbed. Titles that are recorded in a recording mode that does not support high-speed dubbing cannot be dubbed. (When performing high-speed dubbing in DVD-Video format, titles recorded in a mode such as AF mode cannot be dubbed.) Content for which editing, such as deleting of scene, has been performed cannot be dubbed at high speed using BDMV format.
à l’endroit où l’enregistrement est suspendu ou annulé. CARD CAMERA RECORDER GY-HM850/GY-HM890 (SR-HD1700US/EU/AG/ER) Fichiers MOV enregistrés sur la JVC ProHD MEMORY CARD CAMERA RECORDER GY-HM850/GY-HM890 ● MOV files that are recorded on the SD card with “Recording in (SR-HD1700US/EU/AG/ER) DCIM Folder”...
Page 116
● Los archivos MOV editados en y exportados desde Final Cut Archivos MOV grabados en la JVC ProHD MEMORY Pro no son compatibles. CARD CAMERA RECORDER GY-HM850/GY-HM890...
Page 117
Hinweise zum Importieren von Dateien mithilfe des File MOV registrati sulla JVC ProHD MEMORY LAN-Anschlusses CARD CAMERA RECORDER GY-HM850/GY-HM890 (SR-HD1700US/EU/AG/ER) (SR-HD1700US/EU/AG/ER) ● Wenn Sie die FTP-Übertragung mit mehreren ausgewählten ● I file MOV che sono stati registrati sulla scheda SD con Dateien ausführen, werden die Dateien möglicherweise nicht...