3
7
Type in the document name, and then touch [OK].
8
Touch [OK].
The Direct Input tab appears again. The number of the specified user box appears under "Broadcast
Destinations".
9
Specify the necessary scan settings and original settings.
–
For details on the scan and document settings, refer to the User manual – Network Scanner
Operations.
10
Load the document into the ADF or place it on the original glass.
11
If desired, press the [Proof Copy] key to check a preview image.
–
For details, refer to "Saving after previewing" on page 3-17.
12
Press the [Start] key in the control panel.
Note
Only one user box destination can be specified with a single transmission, but multiple e-mail and fax
destinations can be specified.
3-22
Saving documents
bizhub C650/C550/C451 (FE3)