Directly Specifying An Smb Destination - Konica Minolta Bizhub C451 Operation Manual

6

Directly specifying an SMB destination

Settings can be specified for the following.
Parameter
Host Name
File Path
User Name
Password
Reference
Note
If "Manual Destination Input" (displayed by touching [Security Settings] on the Administrator Settings
screen, then [Security Details]) is set to "Restrict", [Direct Input] does not appear.
1
From the Use Document screen, select the document to be sent, and then touch [Send].
2
Touch [PC (SMB)] on the Direct Input tab.
A screen appears, allowing you to type in the host name for the destination and the file path.
3
Enter the information for the destination, and then touch [OK].
– To check the contents of the shared folders, touch [Reference].
– To specify an additional address, touch [Next Destination], and then enter the information.
The entered addresses appear under "Broadcast Destinations".
6-14
Description
Specify the host name (in uppercase letters) or IP address for the destination. Type us-
ing the keyboard that appears, and then touch [OK].
Type the path to the destination folder in uppercase letters.
Type in the user name used to log on, and then touch [OK].
Specify the password. Type using the keyboard that appears, and then touch [OK].
Check the structure of the folders on the destination computer. This can be used to di-
rectly specify the destination folder.
Sending a user box document
bizhub C650/C550/C451 (FE3)