Specifying utility mode parameters
8
If an error message appears, indicating that the encryption key does not match, the Administrator
Settings screen appears. In this screen, touch [Format HDD].
–
To cancel changes to the settings, touch the menu item name in the Bookmark screen to return to
the selected screen without applying the changes to the settings.
–
To finish specifying settings in the Utility mode, press the [Utility/Counter] key. Otherwise, exit the
Utility mode by touching [Close] in each screen until the screen for the Copy, Fax/Scan or User Box
mode appears.
Reminder
When the machine is turned off, then on again with the main power switch, wait at least 10 seconds to
turn on the machine after turning it off; otherwise, the machine may not function correctly.
In order to enable the setting specified in the Overwrite Temporary Data screen, "Overwrite Temporary
Data" must be set to "Yes".
bizhub C650/C550/C451 (FE3)
8
8-33