Konica Minolta Bizhub C451 Operation Manual page 287

Specifying utility mode parameters
HDD encryption setting
If the security kit is installed, the machine can be set to encrypt the hard disk.
!
Detail
[HDD Encryption Setting] appears when security kit SC-503 is installed.
If the encryption key is specified or changed, data saved on the hard disk may no longer be available.
1
Touch [Security Settings] in the Administrator Settings screen.
2
Touch [6 HDD Setting] in the Security Setting screen.
3
Touch [HDD Encryption Setting] in the HDD Setting screen.
A message appears, requesting confirmation to specify the setting.
4
To encrypt the data, touch [Yes], and then touch [OK].
The HDD Encryption Setting screen appears.
5
Using the control panel keypad or the keyboard that appears in the touch panel, type in the new
encryption key. To delete the entered encryption key, press the [C] (clear) key.
The HDD Encryption Setting screen appears again.
bizhub C650/C550/C451 (FE3)
8
8-39