7 - 4
ET1 Enterprise Tablet Integrator Guide
Password Screen
Figure 7-5
Screen Unlock Using Pattern
To set the ET1 to have the user enter a pattern:
Touch
> Settings > Location & security > Set up screen lock > Pattern.
1.
Touch
to view instructions on the screen. Watch pattern example and then touch OK.
2.
Draw Pattern Screen
Figure 7-6
Draw a pattern connecting at least four dots.
3.
Touch Continue.
4.
Re-draw pattern.
5.
Touch Confirm.
6.
Touch Use visible pattern to show the pattern when user draws pattern.
7.
Touch Use tactile feedback to enable vibration when the user enters password.
8.
Touch Home. Next time the ET1 goes into suspend mode a Pattern is required upon waking.
9.