Disable The Multi-User Feature; Capturing A Log File - Motorola ET1 Integrator Manual

Touch Load User List. The application reads the data from the passwd file and configures the Multi-user
2.
Login feature.
Touch Enable Multiuser to enable the feature. The Login screen appears.
3.
MultiUser Login Screen
Figure 6-6
In the Login text box, enter the username.
4.
In the Password text box, enter the password.
5.
Touch OK.
6.

Disable the Multi-user Feature

NOTE To disable the Multi-user Login feature, the user must have administrator rights. A message displays at
the bottom of the screen notifying the user.
To disable the Multi-user feature:
Touch Launcher > MultiUser Administrator.
1.
Touch Disable MultiUser. The Multi-user feature is disabled immediately.
2.
The ET1 suspends. When resumed, the single-user home screen appears.
3.

Capturing a Log File

The log file and its backup contain a history of login and logout. To capture a log file:
Touch Launcher > Multiuser Administrator.
1.
NOTE To capture a log file, the user must have administrator rights. A message displays at the bottom of the
screen notifying the user.
Touch Export Log to copy the log file to the microSD card. The log file can be captured when the
2.
multi-user feature is in either the enabled or disabled mode.
The log file and a backup log file are named multiuser.log and multiuser.log.bak, respectively.
3.
Administrator Utilities 6 - 7