Decoders; Decoder Params - Motorola ET1 Integrator Manual

4 - 8 ET1 Enterprise Tablet Integrator Guide

Decoders

Configures which bar code decoders are enabled or disabled. For best performance disable all unnecessary
decoders.
Touch Decoders. The Barcode input screen appears. A check in the checkbox indicates that the decoder is
enabled. By default the most commonly used decoders are enabled (shown below with an asterisk). The
supported decoders are:
•
UPC-A*
•
EAN-8*
•
Interleaved 2 of 5
•
GS1 DataBar Expanded*
•
PDF417*
•
MicroQR
•
MicroPDF
•
UK Postal
•
Canadian Postal
•
Codabar*
•
Trioptic 39
•
Korean 3 of 5
•
Webcode
Touch Back to return to the previous screen.

Decoder Params

Use Decode Params to configure individual decoder parameters. Touch Decode Params. The Decode
params screen appears.
Touch the decoder parameter to modify.
•
UPCA
•
Report Check Digit - The check digit is the last character of the symbol used to verify the integrity of
the data. Enables or disables this option. A check in the checkbox indicates that the option is enabled
(default - enabled).
•
Preamble - Preamble characters are part of the UPC symbol consisting of Country Code and System
Character. There are three options for transmitting a UPCA preamble:
• Preamble None - Transmit no preamble.
• Preamble Sys Char - Transmit System Character only (default).
• Preamble Country and Sys Char - Transmit System Character and Country Code ("0" for USA).
Select the appropriate option to match the host system.
UPC-E0*
Code 128*
GS1 DataBar*
Datamatrix*
Composite AB
Aztec*
USPostnet
Japanese Postal
Dutch Postal
MSI
Discrete 2 of 5
Code 11
UPC-E1
EAN-13*
Code 39*
GS1 DataBar Limited
QR Code*
Composite C
Maxicode*
USPlanet
Australian Postal
US4state FICS
Code 93
Chinese 2 of 5
TLC 39