Motorola ET1 Integrator Manual page 68

5 - 2 ET1 Enterprise Tablet Integrator Guide
WLAN Network Security Dialog Boxes
Figure 5-1
•
If the network security is Open, touch Connect.
•
If the network security is WEP or WPA/WPSA2 PSK, enter the required password and then touch
Connect.
•
If the network security is 802.1x EAP:
• Touch the EAP method drop-down list and select PEAP, TLS or TTLS.
• Touch the Phase 2 authentication drop-down list and select None, PAP, MSCHAP or MSCHAPV2.
• If required, touch CA certificate and select a Certification Authority (CA) certificate.
CA certificates are self-signed digital certificates. CA certificates are used to determine whether to
trust certificates issued by the CA.
• If required, touch User certificate and select a user certificate.
If a User Certificate is required to support the chosen security scheme then select a certificate from
the drop-down list of currently installed certificates. The selected certificate's name appears in the
drop-down list. If the required certificate is not in the list, install it.
• If required, in the Identity text box, enter
• If required, in the Anonymous identity text box, enter
Use the Advanced ID dialog box to enter the 802.1x identity to supply to the authenticator. This value
can be 63 characters long and is case sensitive. For TTLS, EAP-FAST, and PEAP Authentication
Types, it is recommended entering the identity anonymous (rather than a true identity). You can
optionally enter a fully qualified domain (e.g., mydomain.local) and it will automatically be combined
with the 802.1x identity (i.e., anonymous@mydomain.local) before being sent to the RADIUS server.
• If required, in the Password text box, enter the password or hex key.
• Touch Connect.
Touch .
5.